| Velcro removal method recommended strong glue |
|
1, in the original 502 drops on the original 502 melt, and then quickly wash water 2, with insulating oil, insulating oil pour point in transformer on the table, 502 glue soften quickly, can quickly rub out. 3, acetone solution can be washed 502 is a resin adhesive glue, as long as the use of organic solvents dissolved resin can, such as acetone. But the inhalation of toxic acetone, pay attention to the use of methods, can be part of the glue bottle. 4, it is said that on the refrigerator freezer, plastic will fall down, you can try. 5, the small area of glue 502 glue, soaked with hot water as long as you can, and if a large area with 502 glue, coated with acetone, about 5 ~ 10 minutes to remove. Use hot water immersion, the more heat the better, I tried 502 glue stick hand carelessly, soak in hot water for a while the glue is melted away. 6, with bananas in plastic water droplets, while stirring constantly with the old toothbrush brush, until softened glue off his track, re-use of water drift net, repeatedly brushing, brush clean up. In the clothing back pad with traces of glue water absorbent cloth, and then to glue the painted some signs of white vinegar, and finally dip scrubbed clean with cotton. 7, with a hair dryer blowing hot air, side to put a bit of oil, such as oil or the oil skin, Shun heat entering in the gap 8, the most useful is a water wash (nail polish)! You must try, my specific experience, and then use the toilet paper to wipe the coated side of the line, glue strong words will make a few times. 9, you can use raw lard wipe try. Acetone, gasoline, sesame oil, pour point in the transformer insulating oil in the hands, 502 glue soften quickly, finally rub out. |
- Previous：No
- Next：No